Aritech ATS4000 Instrukcja Obsługi Strona 53

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 83
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 52
ATS Designers Guide 53
Serial – The system sends the message until the first successful transmission to any
of the programmed CS stations;
Parallel – The system sends reports to each programmed CS stations until all
confirm receiving the message.
Table 3-23 CS station communication channels and the necessary expansions
Communication channels Expansion
PSTN None
ISDN ATS7100
GSM ATS7300
Every CS station can be programmed for reporting on different communication channel –
the available channels are analogue (PSTN), digital (ISDN) and cellular (GSM) phone
lines. Each channel supports every event transmission protocol implemented. Due to a
timing conflict between the transmission protocol and the GSM network delay, the
ATS7300 communicator has been equipped with an algorithm to disqualify the influence
of the network delay on the CS station communications.
Table 3-24 ATS control panel reporting system parameters.
Parameter Value
Number of CS stations 4
Phone number count 2 each CS (8 in total )
Communication channels Analogue PSTN/ISDN/GSM
Number of protocols 17
Besides the abovementioned communication characteristics, the system can freely shape
the event reporting method. That option is available through the event class database, a
programming option available in each control panel.
Table 3-25 Reporting protocols.
Protocol Remarks
Tecom V1 phone communicator Used in Australia only
Contact ID – Small
Contact ID – Large
SIA – Small
SIA – Large
XSIA – Small
XSIA – Large
200 Baud FSK Format 1
200 Baud FSK Format 2
200 Baud FSK Format 3
200 Baud FSK Format 4
4x25 Enai
Voice reporting with confirmation
Voice reporting without confirmation
Requires the ATS7200 module
Secure Stream
Securitel serial number
Securitel PIN code
Przeglądanie stron 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 82 83

Komentarze do niniejszej Instrukcji

Brak uwag