Aritech ATS4000 Instrukcja Obsługi Pobierz pdf (Strona 72)

72 ATS Designers Guide

Table 6-3 Characteristic parameters of the Smart card readers.

Value Parameter

ATS1190 ATS1192 ATS1115 ATS1116

Reader range 6-12 cm 6-8 cm

Work temperature -35 – 60*C 0 – 50*C

Housing resistance IP54 IP30

Current consumption 30mA 86mA

Voltage 12V DC

Output load 50mA

Credit applications Yes NO*

*- a keyboard not connected to the system bus displays the ”System error”

message

6.2 Programmer and software

The programmer is sold as ATS1621 and contains all necessary equipment for use:

• Programmer

• RS232 cables for computer connection

• Power supply

The software for accessing the programmer, and controlling all the aspects of work with

smart cards is an integral part of the TITAN program. It’s equipped with a module for

communication with the programmer, containing safeguards allowing only authorised

users to access the equipment. It also contains the tools to program reader configuration

cards, and a series of other additional functions and tools, not related directly with smart

cards, but with cards in general:

• Photo ID module for gathering and storing user photographs;

• User verification capabilities – the information is retrieved form the database

whenever the user passes a secure door.

• Card customisation module, with a template wizard, and support for printing cards

with information contained in the system database.

• Credit applications – see section 6.3 below – a function allowing the readers to be

used outside of the security system, to control other equipment (Xerox access,

coffee, gym etc.)

6.3 Credit Applications

Each card contains four memory banks for storing credit units, access to four locations

and priority. Each reader can be assigned to one of four locations with priority from one of

the 16 levels, and the number of consumed credits. The reader output needs to be

configured for credit applications to assure the desired response the user presenting the

card. The reader doesn’t need to be connected to the system!

The user who received access rights to the location programmed in the reader will have

the ability to use the device connected to the reader if his priority level is higher than the

one programmed in the reader, and the number of credits on his card exceeds the

number of credits withdrawn. Thanks to bi-directional communications card-reader, if the

reader accepts the card, the proper changes to the amount of credits available are stored

on it.

Using the TITAN software, the credit unit names and locations can be defined. This way,

access to office equipment, canteens, gyms and other building facilities can be limited.

This function is available in the TITAN software without additional licences and payments.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 82 83

Komentarze do niniejszej Instrukcji

Brak uwag

Aritech ATS4000 Instrukcja Obsługi Strona 72

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Aritech ATS4000